.055” diameter abrasive cord for removing finish on intricate carvings.
Also for deburring agraffes.
1/4” tape for larger work.
23 meters of 150-grit aluminum oxide-coated cord or tape.
For removing material from base of agraffes, to allow them to be turned farther down for alignment. Use by hand.
High speed steel combination drill & countersink is perfect for reaming agraffe holes. Drill diameter 1/16”, body diameter 3/16”. Both ends same. Use either in flexible shaft tool or by hand. Overall length 1-7⁄8”.
Taps for repairing threaded holes in plate. Fits #TW-164 Tap Wrench.
Brass washers for shimming agraffes on installation.
Price per Doz.
Heavy duty steel T-wrench for turning grand agraffes. Length of tool is 4-1⁄2”, and handle measures 4” wide.
Use with hand drill in reverse mode. Cuts counterclockwise around broken screw.
5/64” Drill for #1 Screw Extractor
7/64” Drill for #2 Screw Extractor
5/32” Drill for #3 Screw Extractor
Turn agraffes fast! Steel tool for use in hand drill or other power tool. 3/8” diameter shaft. Length 5-1⁄4”.
